SINGLE PHASE OIL COOL
 
 
Code: SPSVS-02
Details
We offer you Oil Cooled Three Phase Servo Voltage Stabilizers. These stabilizers are used in several industrial, offices and domestic applications. Our Three Phase Oil cooled servo Voltage stabilizers are designed for precise control of output voltage that significantly increases the life of appliances and machine contacted through it. It also reduces breakdown and the cost maintenance.
TECHNICAL SPECIFICATION
STANDERD Confirming to latest IS:9815 and ISO 9001-2008 standerd.
RATING 01 KVA -300 KVA Single phase.
03 KVA -3000 Kva Three Phase.
 
INPUT VOLTAGE Single phase (90V-270V , 140V-280V , 160V-260V )
Three phase (150V-460V , 250V-460V , 270V-460V )
 
OUTPUT VOLTAGE Single phase (220V/230V/240V +/- 1% ).
Three phase ( 380V/400V/415V +/- 2% ).
 
WAVE FORM DISTORTION nill
RESPONSE TIME 10m.sec
CORRECTION METHOD Stepless Correction using Varic
CONTROL CIRCUIT Fully Automatic IC Based Solid State,Glass Epoxy Control Card for easy on line Serviceability
 
INPUT FREQUENCY 45-55Hz
COOLING Natural Air /oil
EFFICIENCY Better Than 98%
DUTY CYCLE 100%
OPERATION Auto/Manual
NO LOAD LOSS Less than 1%
SUITABILITY Suiutable for 3 Phase Unbalanced/Balanced
Supply,Unbalanced/Balaced Loads
 
OPERATING TEMPERATURE -15 C TO 50 C
ADDITIONAL FACILITY Step downm/Isolations
COMPATIBILITY TO Specially Designed Control Card for faithful
DG SET operation on mains as well as DG set.
CONTROL PANEL Power on Indicator,Low /High input Indicator,
Auto/Manual Selector Switch, PushSwitches to
Adjust output Voltage inManual Mode, Selector
Switch to monitor input/ output voltage
With in 5%of the set output voltage,Volt meter to
Indicator output/ Input voltage.
 
TRASFORMERS & VARIAC Are wound with electrolyte Ghrade Copper of
99.9% purity . low loss CRGO laminatiopn is used to
Increased over all efficiency. This reduces energy
Losses and hences saves electricity
 
EARTHING Provided through two bolts 7 nuts
HIGH VOLTAGE With stands 2.5KV for power transformer
INSULATOR Better than 5m ohms because of wound
RESISTANCE components being bvaked in the oven at 110 C after Vacuum impregnation